http://hbchemical.com/wp-content/uploads/2014/04/Cilbond-80ET.pdf WebCilbond 12E is a solvent-based primer for use under Cilbond cover-coat systems, notably Cilbond 80ET, that can be used to bond a wide range of elastomers to metals and plastics.

CILBOND 12E GALLON - Rudolph Bros

[email protected] Emergency telephone number Emergency telephone +44(0)7778 029192 Classification of the substance or mixture Physical hazards Flam. Liq. 2 - H225 Health hazards Acute Tox. 4 - H312 Acute Tox. 4 - H332 Skin Irrit. 2 - H315 Eye Dam. 1 - H318 Skin Sens. 1 - H317 Repr. 2 - H361d STOT SE 3 - H335, H336 STOT RE 2 - H373 WebCILBOND® 62W. CILBOND ® 62W is a single-layer, water-based adhesive promoter for compounds such as NBR, HNBR, ACM, VAMAC ®, and ECO and it can bind a multitude of metals and plastics. CILBOND® 65W. CILBOND ® 65W is a water-based adhesive for silicone rubber and peroxide cross-linked fluorpolymers. The material offers outstanding … software 3d modelling

Home - HB Chemical

WebTrade name: CILBOND 10 E (Contd. of page 5) 43.0 - As protection from splashes gloves made of the following materials are suitable: Recommended for protection from splashes: disposable nitrile gloves (minimum thickness 0.12 mm) with long cuffs. After contact with the chemical preparation, take the disposable nitrile glove off WebCilbond 49SF must be applied to carefully prepared surfaces for it to be effective. Surfaces should ideally be grit blasted with clean, filtered sharp alumina or steel grit (200-400µ), and solvent degreased. For cast PU’s it is vital that when dealing with hard surfaces, such as case hardened steel, stainless steel and some WebShelf Life 12 Months from Date of Manufacture NOTE : Cilbond 89ET is not recommended in very humid climates where temperatures exceed 35 ... Cilbond 89ET is excellent for low-temperature post-vulcanisation bonding, provided the coated surface can at least 60°C (ideally 70ºC). Applications include the moulding of castable PU onto cured software 3utools